Airtac SAIJ80 Adjustable Cylinder SAIJ80AX275-20
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX275-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 275mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke275 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX275-20
The AirTAC SAIJ80X275-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster.
This unit utilizes a SUS420J2 stainless steel rod for enhanced durability against moisture and features PT tapered port threads (G3/8). The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE or DMSE switches if a magnet is added later. It supports a standard mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX275-20 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX275-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX275-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX275-20 Is Used
Machine Changeovers
Fine-tune the 255-275mm end-position rapidly when switching between product sizes on a packaging line, avoiding the need to physically swap cylinders.
Variable End Stops
Dial in the exact retraction point during assembly operations, using the 20mm adjustment screw to compensate for mechanical wear or sensor drift.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX275-20 the Right Cylinder?
The adjustable 255-275mm travel window is perfect for applications requiring variable end-stops or product-size changeovers without swapping the physical cylinder. For a fixed end-position, a standard SAI cylinder is sufficient.
Because the 275mm stroke is substantial, ensure adequate external guiding to prevent excessive side-loading on the rod. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding, consider an external rod lock or the SAIL series. This model is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX275-20 FAQ
At the maximum 1.0 MPa pressure, it can deliver up to 513 kgf.
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke from 275mm down to 255mm. It sets the travel end but does not lock the load without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX275-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.