Airtac SAIJ80 Adjustable Cylinder SAIJ80AX30-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX30-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 30mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke30 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX30-10
The AirTAC SAIJ80X30-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position at commissioning. With a nominal 30 mm stroke and a 10 mm adjustment range, it provides a usable travel window of 20-30 mm without needing external stops.
This variant is equipped with a SUS420J2 stainless steel rod (option A) for enhanced corrosion resistance and uses PT tapered port threading. The extruded aluminum barrel includes sensor grooves on both sides, ready for AirTAC CMSE reed and DMSE solid-state switches if you add a magnet later. It supports the standard SAIJ mounting set, including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX30-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX30-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX30-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX30-10 Is Used
Machine Setup Changeover
Fine-tune the 20-30 mm travel window during product line changeovers to perfectly position stops without machining new brackets.
Variable End-Stop Tuning
Dial in the exact retraction point during commissioning using the rear screw, eliminating the need to bolt on external physical stops.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX30-10 the Right Cylinder?
The adjustable stroke is perfect for machine setups requiring variable end-stops or product-size changeovers, avoiding the need to swap out a fixed-stroke SAI cylinder. Because the rear adjuster acts only as a travel stop and the air cushions handle deceleration, this cylinder will not hold a load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
When replacing an ISO 15552 cylinder, verify the 80 mm bore, 30 mm nominal stroke, 10 mm adjustment range, G3/8 port, and your required mounting style. The 25 mm rod diameter and M20x1.5 rod thread provide excellent rigidity, though any long unsupported stroke still requires an external guide to prevent side-load damage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX30-10 FAQ
At 0.5 MPa, the push force is 2513 N.
The rear adjuster screw lets you shorten the effective stroke by up to 10 mm. For this 30 mm nominal stroke model, it creates an adjustable travel window of 20-30 mm so you can set the exact end position during setup.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX30-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.