Airtac SAIJ80 Adjustable Cylinder SAIJ80AX450-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX450-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 450mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke450 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX450-10
The AirTAC SAIJ80X450-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster.
This variant uses an SUS420J2 stainless steel rod for improved corrosion resistance and features PT tapered port threads with a G3/8 connection. Because the stroke extends to 450mm, the 25mm rod diameter should be paired with an external guide to prevent excessive side-loading on the extruded aluminum barrel.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX450-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX450-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX450-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX450-10 Is Used
Machine Setup Calibration
Fine-tune the 440 to 450mm retract position during initial commissioning to achieve precise end-stop alignment without machining new spacer blocks.
Product Size Changeover
Quickly adjust the stroke end by up to 10mm on packaging lines when switching between slightly different product dimensions.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX450-10 the Right Cylinder?
The 10mm adjustment range is ideal for fine-tuning end stops during machine setup or product changeovers, replacing the need to physically swap out a fixed-stroke SAI cylinder.
When integrating this model, remember the rear adjuster acts only as a travel stop and does not hold the load without continuous air pressure. For true load-holding requirements, consider an AirTAC SAIL or BSAI cylinder. As a dimensionally interchangeable ISO 15552 component, it shares the standard mounting footprint but utilizes a reduced SAIJ bracket set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX450-10 FAQ
At its maximum 1.0 MPa pressure, it can deliver up to 513 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the nominal 450mm stroke by up to 10mm, creating a 440 to 450mm travel window. It only sets the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX450-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.