Airtac SAIJ80 Adjustable Cylinder SAIJ80AX475-75
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX475-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 475mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke475 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX475-75
The AirTAC SAIJ80X475-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a usable travel window of 400 to 475 mm. The rod is constructed from SUS420J2 stainless steel, offering enhanced durability against moisture and minor side-load wear compared to standard carbon steel.
This adjustable model allows operators to dial in the retract end-position precisely during commissioning without adding external stops. It includes variable air cushions at both ends with a 36 mm stroke length, and the extruded aluminum barrel features sensor grooves on both sides for direct mounting of CMSE or DMSE switches.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX475-75 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX475-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX475-75
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX475-75 Is Used
Product Changeover Adjustment
Dial in the retract stroke from 400 to 475 mm during line changeovers to accommodate varying product lengths without swapping the cylinder.
End-Position Calibration
Fine-tune the final end-stop during machine commissioning to perfect positioning without fabricating external shim plates.
Variable Length Diverter
Act as a diverter on a conveyor handling mixed-size packages, adjusting the pusher travel window to match specific item dimensions.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX475-75 the Right Cylinder?
The 75 mm adjustment range is highly effective for product changeovers, allowing you to shorten the stroke from 475 mm down to 400 mm on the fly. Because the nominal 475 mm stroke is long, an external guide is recommended to prevent excessive rod deflection and premature seal wear.
For fixed travel needs without commissioning adjustments, the standard SAI series is sufficient. Note that the rear adjuster acts only as a travel stop and provides no load-holding capability without live air pressure; for true fail-safe holding, consider the SAIL or BSAI series. This SKU uses PT tapered ports and the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX475-75 FAQ
At 0.7 MPa, the push force increases to 3518 N.
The rear adjuster stopper allows you to mechanically shorten the effective stroke from its nominal 475 mm down to 400 mm. It functions as an end-stop for position tuning and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX475-75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.