Airtac SAIJ80 Adjustable Cylinder SAIJ80AX60-20S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX60-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 60mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke60 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX60-20S
The AirTAC SAIJ80X60-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 40 to 60 mm usable travel window.
This adjustable-stroke design allows precise end-position tuning during commissioning without swapping hardware. It features PT tapered ports and standard variable air cushions at both ends, but the rear adjuster acts only as a travel stop, not a load lock.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX60-20S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX60-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX60-20S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX60-20S Is Used
Machine Setup Tuning
Fine-tune the 40-60 mm travel end position precisely during commissioning to accommodate slight mechanical variations without machining new spacers.
Product Changeover
Quickly adjust the stroke length on packaging lines when handling different product sizes, using the rear screw to set the new retract stop.
Variable End Stops
Achieve exact clamping or positioning depths on short-stroke tooling where a fixed 60 mm cylinder would require manual shimming.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX60-20S the Right Cylinder?
The 20 mm adjustment range is ideal for dialing in exact end stops during machine setup or product changeovers, avoiding the need for external stops.
For exact ISO 15552 replacement matching, verify the 80 mm bore, 60 mm nominal stroke, 20 mm adjustment range, PT port threads, and the -S magnet option. Note that the SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. If the machine requires true load holding without live air pressure, use an external rod lock or consider the SAIL or BSAI series instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX60-20S FAQ
The rear adjuster screw allows you to trim the nominal 60 mm stroke back by up to 20 mm, creating a usable travel window of 40 to 60 mm. The adjuster functions as a mechanical stop for end-position tuning and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX60-20S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.