Airtac SAIJ80 Adjustable Cylinder SAIJ80AX70-10S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX70-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 70mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke70 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX70-10S
The AirTAC SAIJ80X70-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the end position during commissioning. It provides a usable travel window of 60-70 mm by dialing back the 70 mm nominal stroke by up to 10 mm. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement.
This specific SKU features a SUS420J2 stainless steel rod (code A) for improved corrosion resistance and includes a magnet (-S) for use with AirTAC CMSE reed or DMSE electronic sensors. It uses PT tapered port threads and relies on variable air cushions at both ends to decelerate the load. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX70-10S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX70-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 70 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX70-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX70-10S Is Used
Machine Setup Calibration
Dial in the exact 60-70 mm end position during machine commissioning without swapping cylinders or adding external stopper blocks.
Product Size Changeover
Quickly adapt the stroke end-stop on packaging lines when processing different product sizes, using the 10 mm adjustment range.
Precision End-Positioning
Fine-tune the retract end position to absorb mechanical tolerances, ensuring precise placement of the 2513 N actuation force.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX70-10S the Right Cylinder?
The adjustable stroke is ideal for applications requiring variable end stops or product-size changeovers, offering more setup flexibility than a fixed-stroke SAI cylinder. When matching ISO 15552 replacements, specify the 80 mm bore, 70 mm stroke, 10 mm adjustment, PT G3/8 port, and the -S magnet.
Because the stroke is under 300 mm, side-load stress is minimized, but the 25 mm rod and M20x1.5 thread still handle moderate side loads well. For applications requiring the load to be held mechanically without continuous air pressure, consider the SAIL (air-released lock) or BSAI (clamp-lock) series instead, as the SAIJ adjuster is not a locking device.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX70-10S FAQ
At the maximum 1.0 MPa pressure, it delivers up to 513 kgf.
The rear adjuster screw lets you shorten the nominal 70 mm stroke by up to 10 mm, creating a 60-70 mm usable travel window. It functions as a mechanical stop to fine-tune the end position and is not a load-holding lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX70-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.