Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-10
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX700-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke700 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-10
The AirTAC SAIJ80X700-10 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 690 to 700 mm usable travel window, allowing precise end-position tuning without adding external stops.
This adjustable-stroke design is ideal for commissioning and product changeovers, letting you dial in the retract end-position on the fly. The rear adjuster functions strictly as a travel stop, not a lock, meaning it cannot hold a load without live air pressure. For load-holding without continuous air, you would need to specify an SAIL or BSAI variant.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-10 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-10 Is Used
Long-Stroke Machine Setup
Dial in the 690-700 mm travel window during commissioning to perfectly align long-stroke clamping or lifting motions without machining custom spacers.
Product Changeover
Quickly adjust the retract end-position by up to 10 mm when switching conveyor line product sizes, saving downtime on the factory floor.
End-Position Tuning
Fine-tune the rear stopper to compensate for mechanical wear or slight misalignment over the cylinder's 700 mm travel cycle.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-10 the Right Cylinder?
The 10 mm adjustment range is perfect for fine-tuning a long 700 mm travel distance. Because the stroke is 700 mm, an external guide is highly recommended to prevent excessive side-loading on the 25 mm rod and M20x1.5 rod thread.
To match this cylinder as an ISO 15552 replacement, specify an 80 mm bore, 700 mm stroke, 10 mm adjustment, PT port threads, and no magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. If you need position feedback, note that this unit lacks a magnet, so CMSE reed and DMSE electronic sensors cannot be used without upgrading to an -S model.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-10 FAQ
At 0.9 MPa, the push force increases to 4523 N.
The rear adjuster allows you to shorten the 700 mm nominal stroke by up to 10 mm, creating a 690-700 mm usable travel window. It acts as a mechanical stop and does not lock the load without air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.