Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100
The AirTAC Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke700 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100
The AirTAC SAIJ80X700-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 100 mm. This creates a highly flexible 600-700 mm usable stroke window, letting you dial in the exact end position during commissioning without swapping out the entire unit. Delivering a robust 4523 N of push force at 0.9 MPa, it is built to handle demanding industrial loads.
This 80 mm bore model incorporates a SUS420J2 stainless steel rod for superior corrosion resistance compared to standard carbon steel. It uses PT tapered port threads (G3/8) and relies on a 36 mm air cushion at both ends to decelerate the payload smoothly. Because the rear adjuster acts only as a mechanical stop, it will not hold the load without live air pressure; for fail-safe holding, consider the SAIL or BSAI series.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100 Is Used
Variable End-Stop Positioning
Set precise rear end positions on a conveyor sorting line, using the 100 mm adjustment window to accommodate different package sizes without reinstalling the cylinder.
Machine Changeover Tuning
Fine-tune the retract stroke during product changeovers, saving setup time by simply turning the rear adjuster screw rather than swapping out mechanical spacers.
Assembly Press Depth Control
Dial in the exact 600 to 700 mm travel needed for an assembly press, ensuring accurate positioning of large components during automated fabrication.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100 the Right Cylinder?
Choose this adjustable-stroke model over a fixed SAI cylinder when your application requires variable end stops or frequent product-size changeovers on the same line. If you need less force, stepping down to a 63 mm bore yields 2805 N of push at 0.9 MPa, while moving up to a 100 mm bore provides 7068 N for heavier payloads.
When replacing an ISO 15552 cylinder, match the 80 mm bore, 700 mm stroke, 100 mm adjustment range, PT G3/8 ports, and your required mounting interface (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that at 700 mm of travel, the 25 mm rod and M20x1.5 thread still require an external guide to prevent excessive side-loading on the unsupported piston rod.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100 FAQ
The rear adjuster screw acts as a mechanical stop that shortens the retract stroke by up to 100 mm. This gives you a usable travel window between 600 and 700 mm, allowing you to fine-tune the end position without adding external stops.
At 0.9 MPa, the SAIJ80X700-100 provides 4523 N of push force and 2268 N of pull force. It operates at speeds between 30 and 800 mm/s and uses a 36 mm air cushion at both ends to decelerate the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.