Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX700-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke700 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100S
The AirTAC SAIJ80X700-100-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 600 to 700 mm. The extruded aluminum barrel features sensor grooves on both sides, and this -S variant includes a magnet for direct compatibility with CMSE reed and DMSE electronic solid-state switches.
This model utilizes a SUS420J2 stainless steel piston rod (code A) with an M20x1.5 thread, offering solid resistance to lateral stress, though the lengthy 700 mm stroke still necessitates an external guide to prevent binding. The rear adjuster functions strictly as a mechanical stop to fine-tune the retract position during commissioning or product changeover without swapping the cylinder. It does not hold the load without live air pressure; for true load-holding without continuous air, an external rod lock or the BSAI clamp-lock series is required.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100S Is Used
Product Changeover Dials
Quickly adjust the retract distance by up to 100 mm when switching a production line to a different package or part size, avoiding physical spacer swaps.
Machine Setup Tuning
Fine-tune the end-of-stroke position during commissioning to perfectly time heavy-duty pressing or lifting motions without replacing the whole actuator.
Variable End Stops
Set precise retraction limits on conveyor sorting gates or diverter arms, allowing operators to modify the travel window between 600 and 700 mm on the fly.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100S the Right Cylinder?
Select this 80 mm bore unit when your application demands high force combined with variable end-stop positioning. If you need less thrust, stepping down to a 63 mm bore yields 1402 N of pull force at 0.5 MPa, whereas moving up to a 100 mm bore provides 3681 N of pull force. The SAIJ80X700-100-S is chosen over a fixed-stroke SAI specifically to dial in the retract end-position during machine setup, saving the effort of adding external stops or machining custom spacers. Because the nominal stroke is 700 mm, an external guide is strongly recommended to manage side loads and prevent rod deflection. This configuration includes PT tapered port threads, a -S magnet for sensing, and supports SAIJ mounting options Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100S FAQ
At 0.9 MPa, the push force increases to 4523 N.
The rear adjuster acts as a mechanical stop that allows you to trim the effective stroke back by up to 100 mm from the nominal 700 mm, providing a usable travel window of 600 to 700 mm. It requires live air to move and does not lock or hold the load without continuous pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.