Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-20
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX700-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 700mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke700 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-20
The AirTAC SAIJ80X700-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 680 to 700 mm usable travel window, allowing you to dial back the nominal 700 mm stroke by up to 20 mm during commissioning.
This variant is configured with a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance and a PT tapered port thread. The extruded aluminum barrel includes sensor grooves on both sides, and the rod diameter of 25 mm with an M20x1.5 thread provides excellent rigidity, though a 700 mm stroke still requires an external guide to prevent excessive side-loading.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-20 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-20
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-20 Is Used
Variable End-Stop Positioning
Fine-tune the 680-700 mm travel window on the fly to accommodate varying product lengths without physically swapping out the cylinder.
Machine Changeover Setup
Use the 20 mm rear adjuster to precisely set the retracted end position during product size transitions on automated lines.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-20 the Right Cylinder?
Choose this adjustable-stroke model over a fixed SAI cylinder when you need fine end-position tuning at machine setup or product changeover without adding external stops. For higher force, a 100 mm bore provides 7068 N.
The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles. Because the rear adjuster and air cushions only decelerate the travel end, this cylinder will not hold a load without live air; for fail-safe load holding, consider the SAIL or BSAI series instead. It is dimensionally interchangeable with other ISO 15552 cylinders, matching the 80 mm bore, 700 mm stroke, 20 mm adjustment, PT port, and no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-20 FAQ
The maximum allowable operating pressure is 1.0 MPa.
The rear adjusting screw acts as a mechanical stopper that lets you shorten the effective travel from the 700 mm nominal stroke down to 680 mm. It decelerates the end position but does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX700-20
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.