Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-10S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX95-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 95mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke95 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-10S
The AirTAC SAIJ80X95-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing an 85-95mm usable travel window for precise end-position tuning. The extruded aluminum barrel features sensor grooves on both sides for flexible switch placement.
This variant includes a SUS420J2 stainless steel rod (code A) for improved corrosion resistance and ships with a -S magnet for CMSE reed and DMSE electronic sensors. Fluid ports are PT tapered G3/8. The rear stopper allows you to dial in the exact retract distance without adding external stops, making it highly effective for machine setups requiring frequent product-size changes.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-10S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-10S Is Used
Product Changeover
Dial in the 85-95mm travel window during format changes on packaging lines without swapping the cylinder.
End-Stop Tuning
Use the rear screw to precisely set the retract position during machine commissioning, avoiding external stopper fabrication.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-10S the Right Cylinder?
The 10mm adjustment window is perfect for fine-tuning the retract end during commissioning rather than machining custom spacers. If your application requires holding a load without live air pressure, note that this rear adjuster acts only as a travel stop; you should select an SAIL pneumatic lock or BSAI clamp-lock cylinder instead. To match this ISO 15552 replacement exactly, specify the 80mm bore, 95mm stroke, PT G3/8 port, SUS420J2 rod, and -S magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-10S FAQ
The rear adjuster allows you to shorten the 95mm nominal stroke by up to 10mm, creating an 85-95mm usable travel window. It acts as a mechanical stop to fine-tune the end position and is not a locking mechanism.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.