Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-50S
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX95-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 95mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke95 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-50S
The AirTAC SAIJ80X95-50-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The integrated -S magnet enables position sensing via AirTAC CMSE reed and DMSE electronic switches housed in the dual-side sensor grooves.
With a nominal 95mm stroke and a 50mm adjustment range, this SKU provides a highly flexible usable travel window of 45-95mm. You can fine-tune the retract end-position at commissioning without swapping the cylinder or adding external stops. It features a SUS420J2 stainless steel rod (option A) for superior corrosion resistance and uses PT tapered port threads.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-50S Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-50S Is Used
Machine Changeover
Dial in the exact 45-95mm retract distance during product size transitions without disassembling the tooling or changing the cylinder.
End-Stop Tuning
Use the 50mm rear adjuster to precisely set the final end-position during initial commissioning, absorbing mechanical tolerances instantly.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-50S the Right Cylinder?
Choose this 80mm bore when 50mm (982N at 0.5MPa) lacks thrust, but 100mm (3927N at 0.5MPa) is physically oversized. The 50mm adjustment capacity is perfect for product-size changeovers on a line, allowing rapid end-stop tuning instead of mechanical rebuilds. The 25mm rod and M20x1.5 thread handle high side-load stresses well.
For any stroke over 300mm, an external guide is mandatory to prevent rod wear, though this 95mm travel is compact enough for self-support. Remember that the rear adjuster is a travel stop, not a lock; the SAIJ cannot hold loads without live air. For true load-holding, select the SAIL (air-released lock) or BSAI (clamp-lock) series. This SAIJ uses a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, TCM2 (omitting FB, CA, CB, CR).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-50S FAQ
The rear adjuster screw lets you mechanically shorten the 95mm nominal stroke by up to 50mm. This creates a usable travel window of 45-95mm, allowing you to set the exact retract end-position without altering the cylinder mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX95-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.