Airtac SAIJ80 Adjustable Cylinder SAIJ80AX950-100
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX950-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 950mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ80 mm
- Stroke950 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX950-100
The AirTAC SAIJ80X950-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a 950mm nominal stroke and a 100mm adjustment range, you can dial back the effective travel to anywhere within an 850-950mm window. This enables precise end-position tuning at commissioning without swapping out the entire unit or adding external stops.
This specific SKU is built with an SUS420J2 stainless steel rod (code A) for superior corrosion resistance. Because the 950mm stroke is long, the 25mm rod diameter and M20x1.5 rod thread provide robust support, though an external guide is still recommended to manage side loads. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily mount position switches if needed.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX950-100 Technical Specifications
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX950-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX950-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX950-100 Is Used
Variable End-Stop Tuning
Fine-tune the retract position within the 850-950mm window during machine commissioning to achieve precise stopping without external shims.
Product Size Changeover
Quickly adapt automated lines to different product lengths by rotating the rear adjuster screw to shift the stroke end position.
Long-Stroke Positioning
Leverage the 950mm travel for extended reach operations while maintaining the ability to trim the stroke by up to 100mm for setup flexibility.
Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX950-100 the Right Cylinder?
The adjustable stroke is perfect for machine setups requiring variable end-stops or product-size changeovers. When matching ISO 15552 replacements, verify the 950mm stroke, 100mm adjuster, PT G3/8 port, and your required mounting style.
Note that the rear adjuster acts strictly as a mechanical stop and does not hold the load without live air pressure. For load-holding requirements without continuous air, consider an AirTAC SAIL or BSAI cylinder. The available mounting set for this series includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Operating speed for this bore is 30-800mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ80 Adjustable Cylinder SAIJ80AX950-100 FAQ
It features a rear mechanical stopper that allows you to shorten the effective stroke by up to 100mm. This creates a usable travel window of 850-950mm, letting you trim the retract position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX950-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.