Airtac SAUD Double Rod Cylinder SAUD100X130
The AirTAC SAUD Double Rod Cylinder SAUD100X130 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 130mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke130 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD100X130
The AirTAC SAUD100X130 is a double-acting, double-rod profile cylinder. A 25 mm rod exits both ends of the 100 mm bore, meaning push and pull forces are identical at 3681 N each way at 0.5 MPa. The extruded aluminum barrel keeps the unit shorter than an ISO 15552 cylinder of the same bore. It operates at 30-800 mm/s with a 1/2 inch port.
This twin-rod layout provides rigid anti-twist guidance and lets you mount twin tooling. Because this SKU lacks the -S magnet, it cannot take magnetic sensors. For high-heat duties up to 150 C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD100X130 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD100X130 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 130 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD100X130
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD100X130 Is Used
Twin-Spindle Machining
Drives two synchronized machining heads from one piston, keeping force identical in both directions across the 130 mm travel.
Anti-Rotation Transfer
Moves a heavy workpiece between stations without rotational drift, relying on the dual 25 mm rods for rigid guidance.
Dual-End Ejector
Pushes a part forward while simultaneously tripping a mechanical lever at the rear, using the protruding back rod as a cam.
Is the Airtac SAUD Double Rod Cylinder SAUD100X130 the Right Cylinder?
Choose this 100 mm bore delivering 3681 N equal force both ways when your mechanism needs strict anti-rotation or dual-tool mounting. If you need less power, the 80 mm bore gives 2268 N; if you need more, verify the maximum capacity of your supply. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Since this specific SKU has no -S magnet, you cannot fit CMSG, DMSG, or EMSG switches. For this 130 mm stroke, external guide rails are recommended to absorb side loads and protect the seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD100X130 FAQ
The force is equal both ways because of the double-rod design. It provides 3681 N at 0.5 MPa, 5153 N at 0.7 MPa, and 6626 N at 0.9 MPa. The 1/2 inch port feeds the 100 mm bore to operate at 30-800 mm/s.
No. A plain SAUD cylinder drifts without live air; the adjustable 29 mm cushions only decelerate near the stroke ends, they do not lock. For vertical load holding, install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD100X130
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.