Airtac SAUD Double Rod Cylinder SAUD80X190
The AirTAC SAUD Double Rod Cylinder SAUD80X190 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 190mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke190 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X190
The AirTAC SAUD80X190 is a double-acting, double-rod profile cylinder with an 80 mm bore and 190 mm stroke. Because a rod protrudes from both ends, the push and pull forces are identical at 2268 N each way at 0.5 MPa. The extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. It features a 3/8 inch port, an M20x1.5 rod thread, and adjustable 28 mm air cushions at both ends.
This model provides excellent non-rotating anti-twist guidance and can drive two tools simultaneously. This SKU lacks a magnet, so it cannot take a magnetic switch. For high-heat environments up to 150 C, specify the Viton H seal option.
Airtac SAUD Double Rod Cylinder SAUD80X190 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X190 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X190
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X190 Is Used
Twin-Tool Stamping
Drives two synchronized forming tools from one piston, utilizing the equal 2268 N force on both strokes for balanced part ejection.
Anti-Rotation Diverter
Uses the dual-rod geometry to prevent mechanical twist while pushing heavy packages sideways on a sorting line.
Vertical Lift Gate
Raises and lowers an access gate with a 116 kg vertical lift capacity, maintaining consistent speed throughout the 190 mm travel.
Is the Airtac SAUD Double Rod Cylinder SAUD80X190 the Right Cylinder?
Select this 80 mm bore if your application requires equal 2268 N force in both directions, such as twin-tool driving or anti-rotation guidance. If you need less force, the 63 mm bore delivers 1402 N each way; if you need more, the 100 mm bore provides 3681 N. Mounting is limited to Basic, FA flange, and LB foot styles, matching the AirTAC SC series. Because this SKU lacks the -S suffix, it cannot accept CMSG, DMSG, or EMSG sensors. Note that a plain cylinder drifts without live air; the cushion only decelerates, so use an external rod lock for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X190 FAQ
The force is equal both ways because it is a double-rod cylinder. It outputs 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and 4082 N at 0.9 MPa. The 3/8 inch port feeds both chambers equally.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors. If you need position detection, select the -S magnet option. The dual rods still provide excellent anti-twist guidance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X190
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.