Airtac SAUD Double Rod Cylinder SAUD80X195
The AirTAC SAUD Double Rod Cylinder SAUD80X195 is a genuine double-acting profile-type standard air cylinder with a Ø80mm bore and 195mm stroke, 3/8" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ80 mm
- Stroke195 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 28 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUD Double Rod Cylinder SAUD80X195
The AirTAC SAUD80X195 is a double-acting, double-rod profile cylinder with an 80mm bore and 195mm stroke. A rod exits both ends, so push and pull forces are equal at 2268N each way at 0.5MPa. The extruded aluminum barrel makes it shorter than an ISO 15552 cylinder of the same bore. It uses a 3/8 inch port and an M20x1.5 rod thread.
Standard adjustable air cushions of 28mm at each end decelerate the piston. This SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors.
Airtac SAUD Double Rod Cylinder SAUD80X195 Technical Specifications
| Model | Airtac SAUD Double Rod Cylinder SAUD80X195 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø80 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUD Double Rod Cylinder SAUD80X195
| SAU | Profile-type standard cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUD Double Rod Cylinder SAUD80X195 Is Used
Synchronized Transfer
Drives two parallel conveyor stops at once from one piston, keeping product flow perfectly timed without twisting.
Twin-Spindle Lifting
Lifts and lowers a dual machining head with equal push and pull power, preventing yaw during rapid vertical moves.
Dual-Clamp Gripping
Operates opposing clamp jaws from a single center body, delivering balanced holding pressure on both sides.
Is the Airtac SAUD Double Rod Cylinder SAUD80X195 the Right Cylinder?
Select this 80mm bore model when your mechanism requires equal force both ways, measuring 2268N at 0.5MPa. If you need less force, step down to the 63mm bore which provides 1402N both ways. If you need more, the 100mm bore offers 3681N both ways. A double rod is the right call for anti-rotation guidance or driving twin tools simultaneously. Mounting is limited to Basic, FA, and LB styles, matching the AirTAC SC series. Because this is a non-magnetized SKU, you cannot mount position switches. For any stroke at or above 300mm, use external guide rails to prevent side-load binding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUD Double Rod Cylinder SAUD80X195 FAQ
Because it is a double-rod cylinder, the force is equal in both directions. It outputs 2268N at 0.5MPa, 3175N at 0.7MPa, and 4082N at 0.9MPa. The 3/8 inch port feeds both chambers equally.
No, a plain SAUD80X195 does not hold a load without live air. The 28mm cushions only decelerate near stroke end. For fail-safe holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAUD Double Rod Cylinder SAUD80X195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.