
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X165-30 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 165mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The SAUJ100X165-30 is a double-acting, double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you trim the working stroke by up to 30 mm, giving a usable range of 135-165 mm. The nominal 165 mm is the maximum. This unit uses a 1/2 inch port and an M20x1.5 rod thread.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. It lacks a magnet, so it cannot take a sensor.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X165-30 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Tune the 30 mm extend window on-site to set precise bearing press depths without swapping cylinders.
Adjust the end position for different product heights in a multi-format assembly fixture.
Dial in the exact extend stop for checking part dimensions on an inline measurement station.
If you need more, this 100 mm is the largest available. Choose the SAUJ over a fixed SAU when your machine assembly requires field tuning of the extend end position. The 30 mm adjust window is ideal for fine-tuning clamping or pressing depth without machining new hard stops. Mounting options include Basic, FA flange, and LB foot, compatible with the AirTAC SC series. Because this SKU lacks the -S magnet, you cannot mount CMSG or DMSG sensors. For this 165 mm stroke, guide the load to prevent side-load wear.
Quick checklist
Push is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa. The theoretical max is 801 kgf at 1.0 MPa. The external stop screw shortens the extend stroke by up to 30 mm, giving a usable range of 135-165 mm.
No. This SKU has no -S magnet, so it cannot take a sensor. A plain cylinder does not hold loads on air loss; the piston drifts and the cushion only decelerates. For a held load, use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.