
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X165-40 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 165mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X165-40 is a double-acting double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you shorten the nominal 165 mm stroke by up to 40 mm, yielding a usable 125 to 165 mm window. This prevents buying a new cylinder when a machine builder needs precise field tuning. It features a 1/2 inch port and a 25 mm rod with an M20x1.5 thread.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. It includes adjustable 29 mm air cushions and supports Basic, FA, and LB mountings.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X165-40 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to dial in the exact 125 to 165 mm extend position for pressing bearings without swapping cylinders.
Sets a precise mechanical stop for pallets, trimming up to 40 mm to align with varying load dimensions.
Choose this 100 mm bore over the smaller 80 mm when you need more push force, stepping up from 2513 N to 3927 N at 0.5 MPa. Step down if 2268 N pull is sufficient. Select the SAUJ over a fixed SAU plus external stop when you want integrated stroke trimming without adding fabricated brackets. The 40 mm adjust window is ideal for finalizing end positions during commissioning. Use FA or LB mounts for your frame. Since this SKU lacks the -S magnet, it cannot take CMSG or DMSG sensors; add -S if you need position detection. For this 165 mm stroke, ensure adequate guidance to prevent side-load wear.
Quick checklist
Push is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The nominal 165 mm extend stroke can be shortened by up to 40 mm on-site using the external stop screw, giving a 125 to 165 mm working range. The port is 1/2 inch.
The external stop screw mechanically sets the extend end position. It is not a load lock. A plain cylinder drifts on air loss or when the valve is centered; the 29 mm air cushion only decelerates the piston near the end. For secure load holding, install an external rod lock or pilot-operated check valve. This SKU has no magnet and cannot take sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.