
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X170-75 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 170mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X170-75 is a double-acting, double-rod profile cylinder with an on-site extend stroke adjustment window of 75 mm. You can shorten the nominal 170 mm stroke down to 95 mm using the external stop screw, letting you finalize travel without buying a new actuator. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions. The extruded aluminum profile makes it shorter than an ISO 15552 cylinder of the same bore.
Note this SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors. The stop screw sets the end position but does not lock the load; use an external rod lock for holding.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X170-75 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to fine-tune the 75 mm extend window on-site to dial in the exact seating depth for bearings without swapping actuators.
Adjusts the extend stroke on the fly to accommodate different box heights, ensuring consistent folding pressure across a packaging line.
Provides a 95 to 170 mm travel range to precisely set the mechanical end position for moving heavy pallets or workpieces into a machining station.
Choose the SAUJ over a fixed SAU when your machine assembly requires field tuning of the extend travel, saving the cost of ordering multiple cylinders. The 75 mm adjust window is ideal for dialing in exact endpoints. Mounting options include Basic, FA flange, and LB foot, compatible with the AirTAC SC series. Because this SKU has no -S suffix, it cannot accept magnetic sensors. Since the 170 mm stroke is under 300 mm, side-load risks are lower, but always guide the load to prevent rod binding. Operating speed spans 30-800 mm/s.
Quick checklist
Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The nominal 170 mm stroke can be shortened by up to 75 mm via the external stop screw, yielding a usable extend range of 95-170 mm. It uses a 1/2 inch port and 29 mm adjustable cushions.
An external stop screw physically limits the piston's extend travel, letting you trim the stroke on-site. This stop only sets the end position; it is not a load lock. A plain cylinder will drift on air loss or when the valve is centered, as the 29 mm air cushion only decelerates near the end of travel. To maintain position, install an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.