
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X175-75 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 175mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X175-75 is a double-acting, double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you trim the 175 mm nominal stroke by up to 75 mm, yielding a usable working stroke of 100 to 175 mm. This bore delivers substantial power, pushing 3927 N and pulling 3681 N at 0.5 MPa. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions.
The extruded aluminum profile keeps this unit shorter than an ISO 15552 cylinder of the same bore. This base SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors. If your machine needs position detection, select an -S variant.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X175-75 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to dial in the exact 100 to 175 mm extend distance for pressing bearings without swapping cylinders.
Adjusts the extend endpoint on-site to accommodate different box heights in packaging lines.
Provides a field-tunable stop for sorting diverters that need precise stroke limits to handle varied product sizes.
When sizing this 100 mm bore unit, consider the neighboring 80 mm and 100 mm options. The 80 mm bore pushes 2513 N at 0.5 MPa, while this 100 mm bore reaches 3927 N at the same pressure. Choose the SAUJ over a fixed SAU when your assembly requires minor on-site stroke tuning without buying a new cylinder. The 75 mm adjust window is ideal for dialing in exact end positions. Mounting options include Basic, FA flange, and LB foot brackets, which share compatibility with the AirTAC SC series. Because this specific SKU lacks the -S magnet, it cannot support magnetic sensing. For strokes of 300 mm or more, always use external guiding to prevent side-load damage. The external stop sets the end position but does not lock the load; without live air, the piston drifts, and the cushion only decelerates motion near the end. For secure load holding, add an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa it pushes 3927 N and pulls 3681 N. Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa. The theoretical max is 801 kgf at 1.0 MPa. The external stop screw shortens the 175 mm extend stroke by up to 75 mm, giving a 100 to 175 mm working range.
An external stop screw on the extend end physically limits the piston travel, letting you trim the stroke down by 75 mm. This stop sets the end position but is not a load lock. Without live air the piston drifts, and the 29 mm air cushion only decelerates near the end.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.