verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAU Series · Profile-Type Cylinder

Airtac SAUJ100 Adjustable Cylinder SAUJ100X190-100

The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X190-100 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 190mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.

  • BoreØ100 mm
  • Stroke190 mm
  • Port size1/2"
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$175.37 $182.87Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAUJ100 stroke, mounting and version on one page All SAUJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAUJ100 Adjustable Cylinder SAUJ100X190-100

The AirTAC SAUJ100X190-100 is a double-acting double-rod profile cylinder with an on-site stroke adjustment window. You can shorten the extend stroke by up to 100 mm using the external stop screw, yielding a usable working stroke of 90 to 190 mm. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions.

The extruded aluminum profile barrel is shorter than an ISO 15552 cylinder of the same bore. Note this non-magnetized SKU cannot accept position sensors.

Airtac SAUJ100 Adjustable Cylinder SAUJ100X190-100 Technical Specifications

ModelAirtac SAUJ100 Adjustable Cylinder SAUJ100X190-100
SeriesSAU profile-type cylinder
Bore sizeØ100 mm
Stroke190 mm
Acting typeDouble acting
Port size1/2"
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAUJ100 Adjustable Cylinder SAUJ100X190-100

SAUProfile-type standard cylinder series.
100Bore size in mm.
×190Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.

Where the Airtac SAUJ100 Adjustable Cylinder SAUJ100X190-100 Is Used

precision_manufacturing

Press Fit Calibration

Dial in the exact 90 to 190 mm extend position on-site to seat bearings without bottoming out the tooling.

conveyor_belt

Variable Length Diverter

Trim the extend stroke by up to 100 mm to deflect different package sizes on a shared transport line.

warehouse

Adjustable Stop Gate

Set precise pallet end-stops on the fly, adapting the 100 mm window to various pallet footprints.

Is the Airtac SAUJ100 Adjustable Cylinder SAUJ100X190-100 the Right Cylinder?

Choose the SAUJ over a fixed SAU when your machine assembly needs final end-position tuning without buying new hardware. The 100 mm adjustment window lets you dial in the exact extend stop. Mounting options include Basic, FA flange, and LB foot, compatible with the AirTAC SC series. Because this SKU lacks the -S magnet, it cannot take CMSG or DMSG sensors. For any stroke over 300 mm, use external guide rails to prevent side-load wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAUJ100 Adjustable Cylinder SAUJ100X190-100 FAQ

At 0.5 MPa it pushes 3927 N and pulls 3681 N. Push is 5497 N at 0.7 MPa, 7068 N at 0.9 MPa, and the theoretical max is 801 kgf at 1.0 MPa. The nominal 190 mm extend stroke can be shortened by up to 100 mm on-site via the external stop screw, giving a 90 to 190 mm usable range.

The external stop screw mechanically sets the extend end position. It is not a load lock. A plain cylinder drifts on air loss or when the valve is centered, and the 29 mm air cushion only decelerates near the end. For vertical load holding, install an external rod lock or a pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAU Cylinders

Request a Quote for Airtac SAUJ100 Adjustable Cylinder SAUJ100X190-100

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAUJ100X190-100 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.