
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X190-30 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 190mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X190-30 is a double-acting double-rod profile cylinder with an external stop screw. You can trim the extend stroke by up to 30 mm on-site, giving a usable working stroke of 160 to 190 mm. The nominal 190 mm is the maximum length. It features a 1/2 inch port and an M20x1.5 rod thread.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. It has 29 mm adjustable air cushions. Note this SKU lacks a magnet and cannot take a sensor.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X190-30 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Dialing in a bearing press. The stop screw lets you shorten the extend stroke by up to 30 mm to set exact insertion depth.
Adjusting a diverter arm. You can trim the extend length on-site to match varying product widths without changing cylinders.
Folding varying box sizes. The 30 mm window allows operators to fine-tune the folding end position for different carton depths.
Pick the SAUJ over a fixed SAU when you need on-site extend length tuning without buying a new cylinder. The 30 mm adjust window lets you dial in the exact end position. Mounting options include Basic, FA, and LB, compatible with the AirTAC SC series. Since stroke is under 300 mm, side-load guide requirements are minimal. This non-magnet SKU cannot accept CMSG or DMSG sensors.
Quick checklist
Push is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa. The theoretical max is 801 kgf at 1.0 MPa. The 1/2 inch port bore has a 190 mm max stroke that you can shorten by up to 30 mm, yielding a 160 to 190 mm usable extend length.
An external stop screw physically limits the piston to trim the extend length. This stop sets the end position but is not a load lock. The 29 mm air cushion only decelerates the piston near the end. If air is lost the cylinder drifts, so use an external rod lock or pilot-operated check valve for load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.