
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X190-40 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 190mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X190-40 is a double-acting, double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you shorten the nominal 190 mm stroke by up to 40 mm, yielding a usable window of 150 to 190 mm. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.
It lacks a magnet, so this SKU cannot take a sensor. The 29 mm adjustable air cushions only decelerate the piston near the end of travel; they do not lock the load.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X190-40 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to fine-tune the 40 mm extend window on-site for pressing bearings without over-traveling.
Adjusts the extend end position on the fly to match different box heights on a packaging line.
Provides a 150 to 190 mm usable stroke to set precise mold pin heights for varying material thicknesses.
Choose the SAUJ over a fixed SAU when your assembly needs final extend position tuning without buying a new cylinder. The 40 mm adjust window is ideal for dialing in exact stops. Mounting options include Basic, FA flange, and LB foot, compatible with the AirTAC SC series. Since this SKU lacks the -S magnet, it cannot accept CMSG or DMSG sensors. For any stroke over 300 mm, ensure external guides to prevent side-load damage.
Quick checklist
The theoretical max is 801 kgf at 1.0 MPa. The nominal 190 mm extend stroke can be shortened by up to 40 mm via the stop screw, giving a usable range of 150 to 190 mm.
An external stop screw mechanically limits the extend stroke, letting you trim the end position on-site. This stop sets the end position but is not a load lock. The cylinder does not hold a load on air loss; the 29 mm air cushions only decelerate near stroke end. For load holding, use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.