The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X200-20 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 200mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X200-20 is a double-acting double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you trim the 200 mm nominal stroke by up to 20 mm, yielding a usable 180 to 200 mm window. The 1/2 inch port and M20x1.5 rod end handle high flow and heavy loads.
This extruded aluminum profile body is noticeably shorter than an ISO 15552 cylinder of the same bore, saving machine space without losing strength. It lacks a magnet, so this specific SKU cannot accept CMSG or DMSG sensors. If your environment exceeds 70 C, specify the Viton H seal option to operate up to 150 C.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X200-20 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Dialing in a 20 mm window on a press cylinder allows operators to compensate for material thickness variations without changing tooling.
Fine-tuning the extend end position ensures a diverter arm meets varying box sizes perfectly on a high-speed packaging line.
Adjusting the stroke on-site lets maintenance shift a pallet stop block by a few millimeters to align with new conveyor wear strips.
Choose the SAUJ over a fixed SAU when you need final end-position tuning during machine commissioning, avoiding the cost of buying a different cylinder just to shave off a few millimeters. The 20 mm adjust window is ideal for minor mechanical alignment. Mounting options include Basic, FA flange, and LB foot, matching the AirTAC SC series footprint. Because this SKU has no -S suffix, it cannot take a magnetic sensor. Since the 200 mm stroke is under 300 mm, side-load guide requirements are minimal, but always guide the load externally for rigid structures. Remember the stop screw only sets the end position; it is not a load lock.
Quick checklist
Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa. The theoretical max is 801 kgf at 1.0 MPa. The external stop screw lets you shorten the 200 mm extend stroke by up to 20 mm on-site, giving a usable range of 180 to 200 mm. It uses a 1/2 inch port and features 29 mm adjustable air cushions.
No, a plain cylinder drifts when air is lost or the valve is centered. The 20 mm stop screw only sets the end position, and the air cushion only decelerates the piston near the end of travel; neither acts as a brake. To hold a load securely, you must add an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.