
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X210-10 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 210mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X210-10 is a double-acting, double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you shorten the 210 mm nominal stroke by up to 10 mm, yielding a usable 200-210 mm window. The 1/2 inch port and 25 mm rod handle heavy loads, while the extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same 100 mm bore.
The 29 mm adjustable air cushions decelerate heavy masses smoothly.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X210-10 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to dial in a precise 200-210 mm press stroke for inserting bearings without machining custom spacers.
Fine-tunes the extend stop position on a conveyor line to accommodate slight variations in pallet dimensions.
Provides on-site stroke reduction to set exact material forming depth during initial machine commissioning.
Choose the 100 mm if the 80 mm lacks thrust. This SAUJ variant beats a fixed SAU plus external stop when you need compact, built-in end-position tuning without extra fabrication. It supports Basic, FA, and LB mounts compatible with the AirTAC SC series. Since stroke is 210 mm, guide external rods to manage side loads. Note this SKU lacks the -S magnet, so it cannot accept CMSG or DMSG sensors.
Quick checklist
The theoretical max is 801 kgf at 1.0 MPa. The 210 mm extend stroke can be shortened by up to 10 mm via an external stop screw, giving a 200-210 mm usable window.
This SKU lacks a magnet, so it cannot take CMSG or DMSG sensors. The stop screw sets end position but is not a load lock. The cushion only decelerates. For load holding on air loss, use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.