
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X220-100 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 220mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X220-100 is a double-acting, double-rod profile cylinder with an external stop screw. You can trim the extend stroke on-site by up to 100 mm, giving a usable working stroke of 120-220 mm. The 220 mm nominal length serves as the maximum travel. It features a 1/2" port, an M20x1.5 rod thread, and 29 mm adjustable air cushions.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. Note this SKU lacks a magnet and cannot take a sensor.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X220-100 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to fine-tune the 100 mm extend window on-site for pressing bearings without over-traveling.
Adjusts the extend end position to accommodate different package heights on a heavy-duty packing line.
Sets precise stopping distances for varying pallet depths using the external stop screw.
The 100 mm adjust window is ideal for dialing in exact end positions without buying a new cylinder. Mounting options include Basic, FA flange, and LB foot, compatible with the AirTAC SC series. Because this SKU has no -S magnet, it cannot accept CMSG or DMSG sensors. For this 220 mm stroke, ensure external guidance to prevent side-load wear.
Quick checklist
At 0.5 MPa it pushes 3927 N and pulls 3681 N. Push is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The external stop screw shortens the extend stroke by up to 100 mm, giving a usable range of 120-220 mm.
The external stop screw mechanically sets the extend end position but is not a load lock. On air loss the piston drifts, as the 29 mm cushion only decelerates near the end. For secure holding, add an external rod lock or pilot-operated check valve. This non-S SKU also lacks a magnet for sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.