
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X220-30 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 220mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X220-30 is a double-acting, double-rod profile cylinder with an on-site extend stroke adjustment window of 30 mm. You can trim the usable extend travel from the 220 mm maximum down to 190 mm using the external stop screw. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions at each end. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.
Because this SKU lacks the -S magnet option, it cannot accept CMSG, DMSG, or EMSG magnetic switches.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X220-30 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Finalizing insertion depth of bearings where a 30 mm field adjustment window allows perfect tuning without swapping actuators.
Tuning the extend stroke on-site to handle varying box sizes on a packaging line, using the stop screw to set exact travel.
Adjusting the end stop for different pallet widths, relying on the 100 mm bore to deliver high push force for heavy loads.
When sizing this actuator, look at the neighboring bores. Choose the SAUJ over a fixed-stroke SAU when your machine assembly requires minor extend-length tuning without buying a new cylinder. The 30 mm stop-screw window is ideal for finalizing exact end positions in the field. Mounting options include Basic, FA flange, and LB foot brackets, which share compatibility with the AirTAC SC series. Since this unit has no -S magnet, position sensing is not possible. For any stroke over 300 mm, always use external guide rails to prevent side-load damage to the piston rod.
Quick checklist
Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa. The theoretical max is 801 kgf at 1.0 MPa. The nominal 220 mm extend stroke can be shortened by up to 30 mm on-site, giving a usable range of 190-220 mm. The 1/2 inch port and 29 mm cushions are fixed by the 100 mm bore.
An external stop screw physically limits the piston extension, letting you trim the working stroke without disassembling the cylinder. This stop only sets the end position; it is not a load lock. The cylinder will drift on air loss or when the valve is centered, as the air cushions only decelerate motion near the end of travel. For secure load holding, install an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.