
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X280-10S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 280mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X280-10S is a double-acting double-rod profile cylinder with an external stop screw. You can trim the extend stroke on-site by up to 10 mm, giving a usable working stroke of 270 to 280 mm. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions at each end. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.
The -S suffix means a piston magnet is included for CMSG, DMSG, or EMSG sensors. For high-heat environments up to 150 C, specify the Viton H seal option.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X280-10S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Dialing in the final 10 mm of extend stroke on-site to perfectly seat bearings without over-traveling and damaging the housing.
Fine-tuning the extended stop position to accommodate varying pallet tolerances on a heavy-duty conveyor line.
Adjusting the downward extend end-point by a few millimeters to ensure consistent flap folding across different box heights.
Choose the SAUJ over a fixed SAU when you need final end-position tuning during machine commissioning without buying a new cylinder. The 10 mm adjust window is ideal for minor mechanical alignment. Mounting options include Basic, FA flange, and LB foot, sharing compatibility with the AirTAC SC series. The -S magnet enables electronic or reed position sensing. For this 280 mm stroke, ensure external guide rails carry the side-load to prevent piston binding.
Quick checklist
At 0.5 MPa it pushes 3927 N and pulls 3681 N. Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa. The theoretical max is 801 kgf at 1.0 MPa. The external stop screw lets you shorten the 280 mm extend stroke by up to 10 mm on-site, yielding a 270 to 280 mm usable stroke.
The external screw mechanically sets the extend end position. It is not a load lock. If air pressure drops, the piston drifts because the 29 mm air cushion only decelerates motion near the end. For secure load holding, install an external rod lock or a pilot-operated check valve. The -S magnet allows CMSG, DMSG, or EMSG sensors to detect position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.