
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X280-30S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 280mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X280-30S is a double-acting double-rod profile cylinder with an on-site extend stroke adjustment window of 30mm. You can trim the usable stroke from 280mm down to 250mm using the external stop screw. It features a 100mm bore, a 1/2 inch port, and M20x1.5 rod threads. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.
The -S suffix means a built-in magnet is present for CMSG, DMSG, or EMSG sensors. Adjustable air cushions of 29mm decelerate the load at stroke ends.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X280-30S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to dial in the exact 250-280mm extend position for pressing bearings without machining custom spacers.
Adjusts the extend end-point on the fly to accommodate different box heights on a packaging line.
Fine-tunes the mechanical stop distance for pallets of varying widths before stretch wrapping.
When sizing this 100mm bore unit, consider the neighboring 80mm bore if your 0.5MPa push requirement falls below 2513N, or step up if you need more than 3927N. Choose this SAUJ model over a fixed-stroke SAU when your machine assembly requires field tuning of the extend position within the 250-280mm range. It supports Basic, FA flange, and LB foot mounts, and offers SC series mounting compatibility. The -S option equips the cylinder for electronic or reed switches. Because the 280mm stroke exceeds 300mm only marginally, standard side-load guidance practices still apply. Note that the stop screw dictates end position but does not function as a load lock.
Quick checklist
The external stop screw allows you to shorten the extend stroke by up to 30mm, giving a usable range of 250-280mm. It operates at 30-800 mm/s.
The external stop screw physically limits the piston's extend travel to set the exact end position. The -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG, or EMSG sensors directly for position detection. The stop screw only sets position; it does not lock the load on air loss.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.