
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X290-40 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 290mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X290-40 is a double-acting double-rod profile cylinder built for on-site stroke adjustment. An external stop screw lets you trim the extend stroke by up to 40 mm, yielding a usable working stroke of 250 to 290 mm. The nominal 290 mm is the maximum travel. It features a 1/2 inch port and an M20x1.5 rod thread.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. It has no magnet, so it cannot take a sensor.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X290-40 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Finalizes insertion depth for heavy bearings. The 40 mm stop screw window dials in the exact extend position without reprogramming the motion controller.
Accommodates varying box heights on a single line. Operators trim the extend stroke on-site to fold different flap sizes perfectly.
Pushes pallets into a wrapping station. The external stop screw sets the precise end location to align with the wrap film carriage.
Choose this 100 mm bore when you need heavy force but exact end-position tuning. If you need more, confirm larger custom options. Pick this adjustable SAUJ over a fixed SAU plus external stop to save build space and avoid extra hardware. The 40 mm adjust window is ideal for final machine timing. Mounting options include Basic, FA flange, and LB foot, compatible with the AirTAC SC series. For this 290 mm stroke, ensure external guides handle side loads to prevent binding. Note this SKU lacks a magnet and cannot accept CMSG or DMSG sensors.
Quick checklist
At 0.5 MPa it pushes 3927 N and pulls 3681 N. Push is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa. The theoretical max is 801 kgf at 1.0 MPa. The external stop screw shortens the extend stroke by up to 40 mm, giving a usable window of 250 to 290 mm. The 1/2 inch port feeds the 100 mm bore.
The external stop screw physically limits the piston extension, letting you set the end position on-site. This stop is not a load lock. A plain cylinder drifts on air loss, and the 29 mm adjustable air cushion only decelerates the piston near the end. For secure load holding, install an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.