
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X30-30S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 30mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X30-30S is a double-acting double-rod profile cylinder with an on-site extend stroke adjustment window of 30mm. You can shorten the 30mm nominal travel via the external stop screw. It features a 100mm bore, a 1/2 inch port, and M20x1.5 rod threads. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.
The -S suffix means a built-in magnet is present for CMSG, DMSG, or EMSG sensors. Adjustable air cushions of 29mm decelerate the load near stroke end.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X30-30S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Dial in the exact 0-30mm clamping travel on-site to grip variable part geometries without reordering actuators.
Set a hard mechanical end position for a short 30mm movement where electronic sensors alone are insufficient.
If you need more, confirm larger custom options. Choose the 30mm adjust window when you need to dial in a short movement without buying a new cylinder. The -S suffix enables electronic or reed sensing. Basic, FA, and LB mountings are available, compatible with the AirTAC SC series. For any stroke over 300mm, use an external guide to prevent side-load wear.
Quick checklist
At 0.5MPa the push force is 3927N and pull is 3681N. Push is 5497N at 0.7MPa and 7068N at 0.9MPa, with a theoretical max of 801kgf at 1.0MPa. The external stop screw allows you to shorten the 30mm extend stroke by up to 30mm on-site. It uses a 1/2 inch port.
The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG sensors. The external stop screw sets the mechanical end position of the extend stroke. It is not a load lock; a plain cylinder drifts on air loss, so use an external rod lock or pilot-operated check valve to hold a load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.