
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X425-100 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 425mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X425-100 is a double-acting, double-rod profile cylinder built for on-site stroke adjustment. An external stop screw lets you trim the extend stroke by up to 100 mm, giving a usable working range of 325-425 mm. The 425 mm nominal length serves as the maximum travel. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. Note this SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X425-100 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Dial in the exact extend position during press tooling changes by turning the stop screw, accommodating varying material thicknesses without swapping cylinders.
Adjust the extend stroke on-site to deflect different package sizes on a conveyor line, ensuring precise routing without re-engineering the station.
Fine-tune the stopping depth for mixed pallet dimensions in a handling cell, using the 100 mm trim window to adapt to varying load profiles.
Choose the SAUJ over a fixed SAU when your machine assembly requires final end-position tuning within that 100 mm window, avoiding the cost of buying a completely new cylinder. Mounting options include Basic, FA flange, and LB foot styles, sharing compatibility with the AirTAC SC series. Because this is a 425 mm stroke, external guides are strongly recommended to prevent rod bending and manage side loads. Finally, this specific SKU has no -S magnet, meaning it cannot support position sensing.
Quick checklist
Push increases to 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The external stop screw allows you to shorten the extend stroke by up to 100 mm on-site, providing a usable stroke range of 325-425 mm from the 425 mm nominal maximum.
No, a plain SAUJ cylinder does not hold its load on air loss or when the valve is centered; the piston will drift. The adjustable stop screw only sets the end position, and the air cushions merely decelerate the piston near stroke end. Neither feature acts as a load lock or brake. To maintain a held load, you must use an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.