
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X425-30 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 425mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X425-30 is a double-acting, double-rod profile cylinder with an on-site extend stroke adjustment. An external stop screw lets you shorten the 425 mm maximum stroke by up to 30 mm, yielding a usable extend range of 395-425 mm without buying a new actuator. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions at each end. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.
Standard operating pressure is 0.15-1.0 MPa, with a Viton H seal option available to extend the -20 to +70 C temperature range up to 150 C.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X425-30 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to dial in the exact 395-425 mm extend position for inserting bearings or pins without re-engineering the fixture.
Adjusts the extend end position on-site to accommodate different box heights or pallet thicknesses in a single packaging line.
Sets a precise mechanical stop for metal bending or light forming tasks, preventing over-travel on varying material batches.
Choose the SAUJ over a fixed SAU when your assembly requires field tuning of the extend end position, as the external stop screw saves the cost of ordering multiple cylinders. Basic, FA flange, and LB foot mountings are available, sharing compatibility with the AirTAC SC series only. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG sensors. For the 425 mm stroke, use external guides to prevent rod bending and manage side loads.
Quick checklist
Push force increases to 5497 N at 0.7 MPa, 7068 N at 0.9 MPa, and a theoretical maximum of 801 kgf at 1.0 MPa. The external stop screw provides a 30 mm adjustment window, allowing you to shorten the 425 mm maximum extend stroke down to 395 mm on-site.
No, the stop screw only sets the extend end position; it is not a load lock. A plain cylinder drifts when air is lost or the valve is centered, as the 29 mm air cushions only decelerate the piston near the stroke end. For secure load holding, you must install an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.