
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X425-40 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 425mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X425-40 is a double-acting, double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you shorten the 425 mm nominal travel by up to 40 mm, yielding a usable range of 385-425 mm. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions. The extruded aluminum profile barrel is notably shorter than an ISO 15552 cylinder of the same bore.
The stop screw dictates the end position but does not secure the load. Without live air pressure the piston drifts, as the cushion only decelerates near the end of travel. This SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X425-40 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 425 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×425 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to dial in the exact 385-425 mm extend position for inserting components without re-engineering the fixture.
Provides on-site stroke reduction to accommodate different box heights on a packaging line using the external stop screw.
Lets maintenance teams fine-tune the extend endpoint by up to 40 mm to align with varying pallet dimensions.
Choose the SAUJ over a fixed-stroke SAU when your assembly requires minor field adjustments to the extend endpoint without buying new hardware. Mounting options include Basic, FA flange, and LB foot, with compatibility matching the AirTAC SC series. Because the 425 mm stroke is relatively long, you must use external guides to prevent rod bending and manage side loads. Finally, this specific SKU has no -S magnet, meaning magnetic position sensing is not supported.
Quick checklist
At 0.5 MPa it pushes 3927 N and pulls 3681 N. At 0.7 MPa push is 5497 N, and at 0.9 MPa it is 7068 N. The theoretical max is 801 kgf at 1.0 MPa. The external stop screw shortens the extend stroke by up to 40 mm, giving a usable range of 385-425 mm.
No. The stop screw sets the end position but is not a load lock. If air is lost or the valve is centered, the piston drifts. The 29 mm air cushion only decelerates the piston near the end of travel. Use an external rod lock or pilot-operated check valve to hold a load securely.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.