
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X45-10S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 45mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X45-10S is a double-acting, double-rod profile cylinder with an on-site extend stroke adjustment. An external stop screw lets you shorten the 45 mm nominal stroke by up to 10 mm, yielding a usable 35-45 mm window. This prevents buying a custom cylinder for minor field tweaks. The extruded aluminum profile is shorter than an ISO 15552 unit of the same bore. It includes a 1/2 inch port, M20x1.5 rod thread, and a built-in magnet for position sensing.
Adjustable 29 mm air cushions decelerate the payload near stroke end, while Viton H seals can raise the operating ceiling to 150 C.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X45-10S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Assembling bearings where the 10 mm stop screw window allows operators to dial in the exact 35-45 mm insertion depth on-site without swapping actuators.
Halting heavy 200 kg loads on a conveyor; the adjustable end position accommodates varying pallet thicknesses while the cushions absorb kinetic energy.
Driving large grippers where the extend stroke must be precisely matched to part dimensions; the magnetic piston confirms grip via a DMSG sensor.
When sizing this 100 mm bore actuator, evaluate the neighbouring bores and forces. If you need more force, there is no larger standard SAUJ bore, so you would parallel cylinders or change the mechanism. Choose this SAUJ model over a fixed-stroke SAU when your machine assembly has minor mechanical variance or you need precise end-position tuning without machining a hard stop. The 10 mm adjust window is ideal for fine-tuning clamping or pressing positions. Mounting options include Basic, FA flange, and LB foot brackets, sharing compatibility with the AirTAC SC series. The -S suffix means a piston magnet is installed, allowing CMSG, DMSG, or EMSG switches for end-of-stroke confirmation. For any stroke length, ensure external guidance to prevent side-loading damage to the rod seals.
Quick checklist
At 0.7 MPa push is 5497 N, and at 0.9 MPa it is 7068 N. The theoretical max is 801 kgf at 1.0 MPa. The 45 mm nominal extend stroke can be shortened by up to 10 mm via the external stop screw, giving a 35-45 mm working range. It uses a 1/2 inch port and 29 mm adjustable cushions.
The external stop screw physically limits the piston extension, letting you set the end position on-site. This stop is not a load lock. A plain cylinder does not hold a load on air loss; the piston drifts and the cushion only decelerates near the end. For secure load holding, install an external rod lock or pilot-operated check valve. The -S option provides a magnet for CMSG/EMSG sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.