verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAU Series · Profile-Type Cylinder

Airtac SAUJ100 Adjustable Cylinder SAUJ100X45-20S

The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X45-20S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 45mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.

  • BoreØ100 mm
  • Stroke45 mm
  • Port size1/2"
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$140.94 $148.44Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAUJ100 stroke, mounting and version on one page All SAUJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAUJ100 Adjustable Cylinder SAUJ100X45-20S

The AirTAC SAUJ100X45-20S is a double-acting, double-rod profile cylinder with an on-site extend stroke adjustment. An external stop screw lets you trim the nominal 45mm extend stroke by up to 20mm, giving a usable range of 25-45mm without buying a new unit.

This extruded aluminum barrel is shorter than an ISO 15552 cylinder of the same bore. The -S suffix means a piston magnet is fitted for CMSG, DMSG, or EMSG switches. Viton H seals can raise the temperature limit to 150C.

Airtac SAUJ100 Adjustable Cylinder SAUJ100X45-20S Technical Specifications

ModelAirtac SAUJ100 Adjustable Cylinder SAUJ100X45-20S
SeriesSAU profile-type cylinder
Bore sizeØ100 mm
Stroke45 mm
Acting typeDouble acting
Port size1/2"
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAUJ100 Adjustable Cylinder SAUJ100X45-20S

SAUProfile-type standard cylinder series.
100Bore size in mm.
×45Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.

Where the Airtac SAUJ100 Adjustable Cylinder SAUJ100X45-20S Is Used

precision_manufacturing

Short-Stroke Clamping

Ideal for heavy press clamping where the exact 25-45mm contact point must be dialed in on-site to compensate for material thickness variations.

vertical_align_bottom

Position Forming Stops

Provides adjustable physical end stops for metal forming, letting operators trim the extend position by up to 20mm without swapping cylinders.

Is the Airtac SAUJ100 Adjustable Cylinder SAUJ100X45-20S the Right Cylinder?

Choose the SAUJ over a fixed SAU when you need final end-position tuning during machine commissioning. The 20mm adjust window is ideal for fine-tuning short clamping moves. Basic, FA, and LB mounts are available, sharing compatibility with the AirTAC SC series. The -S magnet supports electronic sensing. Since the stroke is only 45mm, side-load risks are minimal, but always guide external loads. Operating speed is 30-800mm/s.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAUJ100 Adjustable Cylinder SAUJ100X45-20S FAQ

Push force is 5497N at 0.7MPa and 7068N at 0.9MPa, with an 801kgf maximum at 1.0MPa. The nominal 45mm extend stroke can be shortened by up to 20mm via the external stop screw, yielding a 25-45mm usable range.

The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG position switches. The cylinder does not hold loads on air loss; the piston drifts and the 29mm air cushion only decelerates near stroke end. Use an external rod lock or pilot-operated check valve for secure load holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAU Cylinders

Request a Quote for Airtac SAUJ100 Adjustable Cylinder SAUJ100X45-20S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAUJ100X45-20S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.