
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X450-100 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 450mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X450-100 is a double-acting, double-rod profile cylinder with an on-site stroke adjustment window. You can trim the extend stroke by up to 100 mm using the external stop screw, giving a usable working stroke of 350-450 mm. The 450 mm nominal length serves as the maximum travel. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. Note this SKU lacks a magnet and cannot take a sensor.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X450-100 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Dial in exact insertion depth on bearing presses by trimming the extend stroke up to 100 mm on-site to accommodate material thickness variations.
Adjust the divert stroke on packaging lines for different carton sizes without changing out the entire actuator assembly.
Set precise mechanical end positions for pallet lifting stations, allowing field changes when pallet dimensions or stacking heights change.
Choose the SAUJ over a fixed SAU when you need on-site extend length tuning without buying a new cylinder. The 100 mm adjust window is ideal for dialing in exact end positions. Mounting options include Basic, FA flange, and LB foot, compatible with the AirTAC SC series. Because this is a non-magnetized SKU, it cannot accept CMSG or DMSG sensors. For the 450 mm stroke, use external guides to prevent rod bending and manage side loads.
Quick checklist
Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The external stop screw lets you shorten the extend stroke by up to 100 mm, giving a usable window of 350-450 mm.
The external stop screw mechanically sets the extend end position to trim travel on-site. This stop is not a load lock. A plain cylinder drifts on air loss and the 29 mm cushions only decelerate near stroke end. For secure load holding, install an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.