verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAU Series · Profile-Type Cylinder

Airtac SAUJ100 Adjustable Cylinder SAUJ100X450-40

The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X450-40 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 450mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.

  • BoreØ100 mm
  • Stroke450 mm
  • Port size1/2"
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$241.70 $249.20Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAUJ100 stroke, mounting and version on one page All SAUJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAUJ100 Adjustable Cylinder SAUJ100X450-40

The AirTAC SAUJ100X450-40 is a double-acting double-rod profile cylinder with an on-site extend stroke adjustment window of 40 mm. You can trim the usable extend stroke from 450 mm down to 410 mm via an external stop screw. It features a 100 mm bore, a 1/2 inch port, and M20x1.5 rod threads. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.

Adjustable air cushions of 29 mm decelerate the piston at stroke ends. Note this SKU lacks a magnet (-S), so it cannot accept CMSG or DMSG sensors.

Airtac SAUJ100 Adjustable Cylinder SAUJ100X450-40 Technical Specifications

ModelAirtac SAUJ100 Adjustable Cylinder SAUJ100X450-40
SeriesSAU profile-type cylinder
Bore sizeØ100 mm
Stroke450 mm
Acting typeDouble acting
Port size1/2"
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAUJ100 Adjustable Cylinder SAUJ100X450-40

SAUProfile-type standard cylinder series.
100Bore size in mm.
×450Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.

Where the Airtac SAUJ100 Adjustable Cylinder SAUJ100X450-40 Is Used

precision_manufacturing

Press Tooling Setup

Fine-tune the extend stroke by up to 40 mm on-site to accommodate different material thicknesses without changing the entire actuator.

conveyor_belt

Pallet Diverter Arm

Adjust the extend stop externally to alter the pusher reach for varying pallet widths on a packaging line.

Is the Airtac SAUJ100 Adjustable Cylinder SAUJ100X450-40 the Right Cylinder?

Choose the SAUJ over a fixed SAU when your assembly requires minor on-site stroke tuning without buying a new cylinder; here you can shorten the extend stroke by up to 40 mm. Mounting options include Basic, FA flange, and LB foot, sharing compatibility with the AirTAC SC series. Because the stroke is 450 mm, add external guides to prevent rod bending and manage side loads. This non-magnetic model cannot support position sensors.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAUJ100 Adjustable Cylinder SAUJ100X450-40 FAQ

Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The external stop screw allows you to shorten the extend stroke by up to 40 mm, giving a usable extend range of 410-450 mm. The 1/2 inch port and 29 mm adjustable cushions are fixed by the 100 mm bore.

No, a plain cylinder does not hold a load on air loss; the piston drifts and the 29 mm cushion only decelerates near stroke end. The external stop sets the end position but is not a load lock. For a held load, use an external rod lock or pilot-operated check valve. Additionally, this SKU lacks a magnet (-S) and cannot accept magnetic sensors.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAU Cylinders

Request a Quote for Airtac SAUJ100 Adjustable Cylinder SAUJ100X450-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAUJ100X450-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.