
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X475-75 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 475mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X475-75 is a double-acting, double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you trim the 475 mm nominal stroke by up to 75 mm, yielding a usable range of 400-475 mm without buying a new actuator. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore, and a Viton H seal option raises the operating temperature to 150 C.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X475-75 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to dial in the exact 400-475 mm extend position for seating heavy bearings without machining custom spacers.
Adjusts the pusher stroke on-site to handle different package sizes on a packaging line, ensuring precise routing.
Fine-tunes the end stop position for varying pallet depths, accommodating inventory changes quickly on the factory floor.
Choose the SAUJ over a fixed SAU when your machine assembly requires field-tuning of the extend end position within the 75 mm window. Mounting options include Basic, FA flange, and LB foot brackets, sharing compatibility with the AirTAC SC series. Because this is a non-magnetized SKU, it cannot accept CMSG or DMSG sensors. For the 475 mm stroke, external guides are strongly recommended to prevent rod bending and manage side loads.
Quick checklist
The theoretical max force is 801 kgf at 1.0 MPa. The 475 mm extend stroke can be shortened by up to 75 mm on-site via an external stop screw, giving a usable range of 400-475 mm. The stop sets the end position and is not a load lock.
This SKU lacks a magnet and cannot accept magnetic switches. A plain cylinder does not hold a load on air loss; the piston drifts and the 29 mm air cushions only decelerate near stroke end. For vertical load holding, install an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.