
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X50-10 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 50mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X50-10 is a double-acting double-rod profile cylinder with an on-site stroke trim window. An external stop screw lets you shorten the extend stroke by up to 10 mm, dropping the usable stroke from 50 mm down to 40 mm. This prevents buying a new cylinder for minor position tweaks. It features a 1/2 inch port and a 25 mm rod with an M20x1.5 thread.
This 100 mm bore delivers heavy thrust, pushing 3927 N and pulling 3681 N at 0.5 MPa. The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. It includes 29 mm adjustable air cushions. Note this SKU lacks a magnet, so it cannot take a sensor.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X50-10 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Trimming the extend stroke by up to 10 mm allows precise bottoming position for pressing bearings without adding external shims.
Adjust the end position on-site to perfectly match varying box heights, ensuring flaps fold cleanly without crushing the cardboard.
If you need more, confirm larger custom options. Choose this SAUJ over a fixed SAU when your machine needs final extend position tuning without machining external stops. The 10 mm adjust window is ideal for fine-tuning clamping or ejecting distances. Mounting options include Basic, FA flange, and LB foot, compatible with the AirTAC SC series. Since this non-S SKU lacks a magnet, you cannot mount CMSG or DMSG sensors. For this 50 mm stroke, side-load is minimal, but always guide the load for stability.
Quick checklist
At 0.5 MPa it pushes 3927 N and pulls 3681 N. It pushes 5497 N at 0.7 MPa and 7068 N at 0.9 MPa. The theoretical max is 801 kgf at 1.0 MPa. The nominal 50 mm extend stroke can be shortened by up to 10 mm via the external stop screw, giving a usable range of 40-50 mm.
The external stop screw mechanically limits the piston extension to set the end position. This stop is not a load lock. A plain cylinder drifts on air loss or valve centering; the 29 mm cushion only decelerates near the end. For a held vertical load, install an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.