
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X500-100 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 500mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X500-100 is a double-acting, double-rod profile cylinder featuring a 100mm external stop screw window. You can trim the extend stroke on-site from its 500mm maximum down to 400mm, eliminating the need to buy a new cylinder for minor position changes. It uses a 1/2 inch port and an M20x1.5 rod thread.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore, and Viton H seals can raise the operating temperature to 150 C.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X500-100 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows on-site stop screw adjustment to dial in the exact 400-500mm extend position for pressing bearings without swapping cylinders.
Tunes the extend stroke on a packaging line to push varying box sizes accurately onto different routing lanes.
Sets a precise mechanical end position for pallets on a conveyor, adjustable as pallet dimensions change.
Choose this SAUJ model over a fixed SAU cylinder when your machine assembly requires field tuning of the extend end position within the 400-500mm range. It supports Basic, FA flange, and LB foot mounts, compatible with the AirTAC SC series. Because this SKU lacks the -S magnet, it cannot take a sensor. For the 500mm stroke, use external guides to prevent rod bending and manage side loads.
Quick checklist
At 0.5 MPa it pushes 3927 N and pulls 3681 N. Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The 500mm nominal extend stroke can be shortened by up to 100mm on-site using the external stop screw, yielding a 400-500mm usable range.
This SKU lacks the -S magnet, so it cannot take a magnetic sensor. The cylinder does not hold load on air loss; the piston drifts and the air cushion only decelerates near stroke end. The stop screw sets end position but is not a load lock. For held loads, use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.