
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X500-30 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 500mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X500-30 is a double-acting, double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you trim the working stroke by up to 30 mm, giving a usable range of 470-500 mm. The nominal 500 mm is the maximum. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions. The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore.
This SKU lacks a magnet, so it cannot accept CMSG or DMSG sensors. For high-heat environments up to 150 C, specify the Viton H seal option.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X500-30 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to micro-adjust the 30 mm extend window on-site to perfect the insertion depth of bearings without changing tooling.
Trim the extend stroke by up to 30 mm to adapt a diverter gate to varying pallet widths on a packaging line.
Choose the SAUJ over a fixed SAU when you need field tuning to dial in a precise end position without buying a new cylinder. The 30 mm adjust window is ideal for minor mechanical tweaks. Basic, FA flange, and LB foot mountings are available, sharing compatibility with the AirTAC SC series. Because this SKU has no -S suffix, it cannot take a magnetic switch. Since the 500 mm stroke is long, always use external guides to prevent rod bending and manage side loads.
Quick checklist
Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The 500 mm nominal extend stroke can be shortened by up to 30 mm via the external stop screw, yielding a 470-500 mm usable window. It uses a 1/2 inch port.
No. A plain SAUJ cylinder does not hold its load on air loss, and the stop screw only sets the end position—it is not a load lock. The 29 mm air cushion merely decelerates the piston near the end of travel. For secure load holding, you must add an external rod lock or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.