
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X500-40 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 500mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X500-40 is a double-acting, double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you shorten the 500 mm nominal stroke by up to 40 mm, yielding a usable working range of 460-500 mm. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions at each end.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. Note this SKU lacks a magnet, so it cannot take a sensor.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X500-40 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Trimming the extend stroke by up to 40 mm on-site allows operators to fine-tune press contact distance without machining new spacer blocks.
A 460-500 mm working range provides flexibility to reposition a diverter arm as conveyor lane widths change on the factory floor.
The external stop screw lets maintenance crews dial in the exact pallet halt point within a 40 mm window to accommodate varied pallet sizes.
The 40 mm adjust window is ideal if your machine needs final end-position tuning without buying custom cylinders; choose a fixed SAU only if no field adjustment is needed. Mounting options include Basic, FA flange, and LB foot, sharing compatibility with the AirTAC SC series. Because this SKU lacks the -S suffix, it cannot accept CMSG or DMSG sensors. For the 500 mm stroke, use external guides to prevent rod bending and manage side loads.
Quick checklist
Push rises to 5497 N at 0.7 MPa, 7068 N at 0.9 MPa, and a theoretical max of 801 kgf at 1.0 MPa. The 500 mm nominal extend stroke can be shortened by up to 40 mm via the external stop screw, giving a 460-500 mm usable range. It uses a 1/2 inch port.
The external stop screw mechanically sets the extend end position but is not a load lock. A plain cylinder drifts on air loss or when the valve is centered, as the 29 mm air cushions only decelerate the piston near the end of travel. For secure load holding, install an external rod lock or pilot-operated check valve. This non-S SKU also lacks a magnet, so it cannot mount position sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.