verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC SAU Series · Profile-Type Cylinder

Airtac SAUJ100 Adjustable Cylinder SAUJ100X55-30S

The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X55-30S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 55mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.

  • BoreØ100 mm
  • Stroke55 mm
  • Port size1/2"
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$147.71 $155.21Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAUJ100 stroke, mounting and version on one page All SAUJ100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAUJ100 Adjustable Cylinder SAUJ100X55-30S

The AirTAC SAUJ100X55-30S is a double-acting double-rod profile cylinder with an external stop screw. You can shorten the extend stroke on-site by up to 30mm, giving a usable working range of 25-55mm. It features a 1/2 inch port and a 25mm piston rod with an M20x1.5 thread.

This 100mm bore profile barrel is shorter than an ISO 15552 cylinder of the same size. The -S suffix means a built-in magnet is present for CMSG, DMSG, or EMSG sensors.

Airtac SAUJ100 Adjustable Cylinder SAUJ100X55-30S Technical Specifications

ModelAirtac SAUJ100 Adjustable Cylinder SAUJ100X55-30S
SeriesSAU profile-type cylinder
Bore sizeØ100 mm
Stroke55 mm
Acting typeDouble acting
Port size1/2"
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3682 N3682 N
0.7 MPa5154 N—
Max (@1.0 MPa)751 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAUJ100 Adjustable Cylinder SAUJ100X55-30S

SAUProfile-type standard cylinder series.
100Bore size in mm.
×55Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.

Where the Airtac SAUJ100 Adjustable Cylinder SAUJ100X55-30S Is Used

precision_manufacturing

Press Fit Adjustment

Fine-tune the 25-55mm extend reach on-site to set precise insertion depth for bearing press operations.

packaging

Variable Height Sealing

Dial in the exact 30mm stroke window to seal cartons of varying heights without changing tooling.

widgets

Position Deposition

Adjust the extend stop to place heavy components accurately at different depths within an assembly fixture.

Is the Airtac SAUJ100 Adjustable Cylinder SAUJ100X55-30S the Right Cylinder?

Choose this SAUJ model over a fixed SAU when you need on-site reach tuning without buying a new cylinder. The external stop screw sets the end position but is not a load lock. Basic, FA, and LB mounts are available. Because the -S magnet is included, you can fit reed or electronic switches directly. For strokes over 300mm, use an external guide to prevent side-load wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAUJ100 Adjustable Cylinder SAUJ100X55-30S FAQ

At 0.5MPa it pushes 3927N and pulls 3681N. Push is 5497N at 0.7MPa and 7068N at 0.9MPa, with a max theoretical force of 801kgf at 1.0MPa. The nominal 55mm extend stroke can be shortened by up to 30mm via the stop screw, yielding a 25-55mm usable range.

The -S suffix provides a built-in piston magnet for CMSG, DMSG, and EMSG position sensors. Note that the cylinder does not hold load on air loss; the cushion only decelerates, and the stop sets position without locking. Use an external rod lock or pilot-operated check valve for secure load holding.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAU Cylinders

Request a Quote for Airtac SAUJ100 Adjustable Cylinder SAUJ100X55-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAUJ100X55-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.