
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X55-50 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 55mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X55-50 is a double-acting, double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you shorten the nominal 55 mm stroke by up to 50 mm, yielding a usable working range of 5-55 mm. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions at each end. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.
This SKU has no magnet, so it cannot accept CMSG, DMSG, or EMSG sensors. For high-heat environments up to 150 C, you can specify the Viton H seal option instead of the standard -20 to 70 C range.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X55-50 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Inserting bearings where the exact 5-55 mm bottoming position must be tuned on-site to match material tolerances without swapping actuators.
Applying foil seals to containers of slightly different heights, using the stop screw to set the precise 50 mm maximum extend depth.
Setting core pins in low-pressure casting equipment, where the external stop allows operators to trim the stroke for different mold setups.
When sizing this actuator, look at both neighboring bores and the 0.5 MPa force figures. Choose the SAUJ100X55-50 over a fixed SAU100 when your assembly requires precise field tuning of the extend end position without buying multiple cylinders. The 50 mm adjust window is generous for a 55 mm nominal stroke, letting you dial in the exact endpoint. Mounting options include Basic, FA flange, and LB foot, with compatibility matching the AirTAC SC series. Because this SKU lacks the -S magnet, it cannot support magnetic sensing. For any stroke over 300 mm, guide the load externally to prevent side-load wear, though this 55 mm stroke is inherently low-risk. Speeds remain 30-800 mm/s across the range.
Quick checklist
Push force is 5497 N at 0.7 MPa, 7068 N at 0.9 MPa, and the theoretical max is 801 kgf at 1.0 MPa. The 55 mm nominal extend stroke can be shortened by up to 50 mm via the external stop screw, giving a 5-55 mm usable range. It uses a 1/2 inch port and 29 mm adjustable cushions.
No. The external stop screw only sets the extend end position; it is not a load lock. If air is lost or the valve is centered, the piston will drift and the air cushion only decelerates near the stroke end. For secure load holding, you must add an external rod lock or a pilot-operated check valve. Additionally, this no-S SKU cannot accept magnetic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.