
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X60-30S is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 60mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X60-30S is a double-acting double-rod profile cylinder with an external stop screw that lets you shorten the extend stroke by up to 30 mm on-site. The nominal 60 mm stroke is the maximum, yielding a usable 30 to 60 mm window. It features a hard-anodized extruded aluminum barrel, making it shorter than an ISO 15552 cylinder of the same bore. A built-in piston magnet supports CMSG, DMSG, and EMSG sensors.
This 100 mm bore runs a 1/2 inch port and M20x1.5 rod thread. The adjustable cushion is 29 mm.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X60-30S |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to dial in the exact 30 to 60 mm insertion depth for bearings on-site without swapping cylinders.
Adjusts the extend endpoint dynamically for packaging lines handling mixed product box sizes.
Sets precise clamping contact points on machining fixtures where raw material thickness varies.
Choose this SAUJ model over a fixed SAU when your assembly requires field tuning of the extend end position without buying new hardware. The 30 mm adjust window is ideal for fine-tuning clamping or pressing depth. Basic, FA flange, and LB foot mountings are available. The -S suffix means a magnet is included for electronic or reed switches. For strokes at or over 300 mm, guide the load externally to prevent side-load wear.
Quick checklist
At 0.5 MPa push is 3927 N and pull is 3681 N. Push is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The 60 mm nominal extend stroke can be shortened by up to 30 mm via the external stop screw, giving a 30 to 60 mm usable window.
The -S suffix provides a piston magnet for CMSG, DMSG, or EMSG sensors. The stop screw only sets the end position; it is not a load lock. The cylinder will drift on air loss, and the 29 mm cushion only decelerates the piston. Use an external rod lock or pilot-operated check valve to hold loads safely.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.