
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X60-50 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 60mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X60-50 is a double-acting, double-rod profile cylinder built for on-site stroke adjustment. An external stop screw lets you trim the extend stroke by up to 50 mm, giving a usable working stroke of 10-60 mm from the 60 mm nominal maximum. It features a 1/2" port, an M20x1.5 rod thread, and 29 mm adjustable air cushions at each end.
The extruded aluminum profile is noticeably shorter than an equivalent ISO 15552 unit, and the Viton H seal option extends operation to 150 C.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X60-50 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Allows operators to dial in the exact 10-60 mm extend position for seating bearings without machining custom spacers.
Adjusts the extend stop on-site to deflect different package sizes on a packaging line by up to 50 mm.
Sets a precise physical end position for heavy pallet stops, tweaking the 60 mm stroke as pallet dimensions vary.
Choose this 100 mm bore when you need high force but exact end-position tuning at assembly. If you need more, note that 100 mm is the largest available. Select the SAUJ over a fixed SAU plus external stop hardware when you want to shorten the extend stroke cleanly by up to 50 mm without adding fabricated brackets. Mount using Basic, FA flange, or LB foot styles, all compatible with the AirTAC SC series. Because this SKU lacks the -S magnet, it cannot accept CMSG/DMSG/EMSG sensors. For any stroke over 300 mm, guide the load to prevent side-load wear.
Quick checklist
Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The external stop screw shortens the extend stroke by up to 50 mm, yielding a 10-60 mm usable range.
The external screw sets the extend end position mechanically. It is not a load lock; on air loss the piston drifts and the 29 mm cushion only decelerates near the end. For held loads use an external rod lock or pilot-operated check valve. Also, this no-S SKU cannot take a magnetic sensor.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.