
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X650-100 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 650mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X650-100 is a double-acting, double-rod profile cylinder with an on-site adjustable extend stroke. An external stop screw lets you trim the 650 mm maximum stroke down by up to 100 mm, yielding a usable 550-650 mm window without buying a new actuator. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions.
The extruded aluminum profile is shorter than an ISO 15552 cylinder of the same bore. Note this SKU lacks a magnet, so it cannot take a sensor.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X650-100 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Dial in the exact 550-650 mm extend reach for loading heavy stamping dies, using the stop screw to adapt to varying mold heights on-site.
Position large pallets on a packaging line, fine-tuning the pusher stroke by up to 100 mm to accommodate different pallet widths without changing hardware.
Actuate heavy access doors where the final closed position must be precisely trimmed in the field to seal properly against varying frame tolerances.
Choose the SAUJ over a fixed SAU when your machine build requires on-site extend length tuning within that 100 mm window. Mounting options include Basic, FA flange, and LB foot, sharing compatibility with the AirTAC SC series. Because this is a non-magnetized SKU, it cannot accept CMSG or DMSG sensors. For the 650 mm stroke, external guides are recommended to prevent rod bending and manage side loads.
Quick checklist
The 650 mm nominal extend stroke is the maximum; you can shorten it by up to 100 mm on-site using the external stop screw, giving a 550-650 mm working range.
No to both. This non-S SKU lacks a magnet and cannot accept sensing switches. Furthermore, a plain cylinder drifts on air loss or when the valve is centered; the air cushion only decelerates near the end of travel and the stop screw only sets the end position. For vertical load holding, you must add an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.