
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X650-30 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 650mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
The AirTAC SAUJ100X650-30 is a double-acting, double-rod profile cylinder with an external stop screw that lets you trim the extend stroke by up to 30 mm on-site. The nominal 650 mm stroke is the maximum, yielding a usable 620-650 mm window. It features a 1/2" port, an M20x1.5 rod thread, and 29 mm adjustable air cushions at each end. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.
Because this SKU lacks the -S magnet, it cannot accept CMSG/DMSG/EMSG sensors. The stop screw sets the end position but is not a load lock; the piston will drift on air loss, so fit an external rod lock or pilot-operated check valve for holding.
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X650-30 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Dial in the exact 620-650 mm extend position on-site to seat bearings perfectly without over-traveling.
Adjust the stop screw by up to 30 mm to change a package pusher reach for varying carton sizes.
Fine-tune the clamping endpoint to accommodate slight pallet width variations during loading.
Choose the SAUJ over a fixed SAU when you need final extend length tuning during machine commissioning without buying a new cylinder. The 30 mm adjust window is ideal for fine-tuning press fits or clamping. Mounting options include Basic, FA flange, and LB foot, compatible with the AirTAC SC series only. Since this SKU has no -S suffix, it cannot take a magnetic sensor. For the long 650 mm stroke, external guides are strongly recommended to prevent rod bending and manage side loads.
Quick checklist
Push force is 5497 N at 0.7 MPa and 7068 N at 0.9 MPa, with a theoretical max of 801 kgf at 1.0 MPa. The external stop screw lets you shorten the 650 mm extend stroke by up to 30 mm on-site, giving a 620-650 mm usable window.
An external stop screw mechanically limits the piston extension to trim the stroke. This stop sets the end position but is not a load lock; the piston drifts without live air, and the 29 mm cushion only decelerates near the end. For secure holding, use an external rod lock or pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.