Airtac SAUJ100 Adjustable Cylinder SAUJ100X800-50
The AirTAC SAUJ100 Adjustable Cylinder SAUJ100X800-50 is a genuine double-acting profile-type standard air cylinder with a Ø100mm bore and 800mm stroke, 1/2" air ports and adjustable end cushioning. Its hard-anodized aluminum-profile barrel is shorter than an ISO 15552 cylinder of the same bore, and it shares SC-series mounting accessories.
- BoreØ100 mm
- Stroke800 mm
- Port size1/2"
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAUJ100 Adjustable Cylinder SAUJ100X800-50
The AirTAC SAUJ100X800-50 is a double-acting, double-rod profile cylinder with an 800 mm maximum stroke. An external stop screw lets you trim the extend stroke on-site by up to 50 mm, yielding a usable working stroke of 750-800 mm. It features a 1/2 inch port, an M20x1.5 rod thread, and 29 mm adjustable air cushions. The extruded aluminum profile barrel makes it shorter than an ISO 15552 cylinder of the same bore.
Note this SKU lacks a magnet (-S), so it cannot accept CMSG or DMSG sensors. For high-heat environments up to 150 C, Viton H seals are available.
Airtac SAUJ100 Adjustable Cylinder SAUJ100X800-50 Technical Specifications
| Model | Airtac SAUJ100 Adjustable Cylinder SAUJ100X800-50 |
|---|---|
| Series | SAU profile-type cylinder |
| Bore size | Ø100 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | 1/2" |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAU series datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G (BSPP). A high-temperature seal (0-150 °C) is available.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | — |
| Max (@1.0 MPa) | 751 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAUJ100 Adjustable Cylinder SAUJ100X800-50
| SAU | Profile-type standard cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAU-family variants: SAUD (double rod), SAUJ (adjustable stroke), SAUF (with built-in solenoid valve), and SAU-S with built-in magnet. Seals: TPU (blank) / Viton H / NBR N. Sensor switches: CMSG / DMSG / EMSG.
Where the Airtac SAUJ100 Adjustable Cylinder SAUJ100X800-50 Is Used
Large Press Dwell Adjustment
Allows operators to fine-tune the 50 mm extend stop on-site to accommodate varying material thicknesses during heavy pressing operations.
Heavy Load Rejecter
Handles large product rejection on a packaging line, using the adjustable end-position stop to dial in the exact ejection distance.
Is the Airtac SAUJ100 Adjustable Cylinder SAUJ100X800-50 the Right Cylinder?
When sizing this actuator, look at both neighboring bores and the 0.5 MPa forces. Choose the SAUJ over a fixed SAU when your machine assembly requires on-site stroke tuning within that 50 mm window. Mounting options include Basic, FA flange, and LB foot styles, with physical mounting compatibility limited to the AirTAC SC series. Because this is an 800 mm stroke, you must use external guides to prevent rod bending and manage side loads. Finally, this specific SKU has no magnet, meaning it cannot support position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB — same as SC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAUJ100 Adjustable Cylinder SAUJ100X800-50 FAQ
Push force rises to 5497 N at 0.7 MPa, 7068 N at 0.9 MPa, and a theoretical max of 801 kgf at 1.0 MPa. The nominal 800 mm extend stroke can be shortened by up to 50 mm on-site using the external stop screw, giving a usable range of 750-800 mm.
No, this SKU lacks a magnet (-S) and cannot accept magnetic sensors. Furthermore, a plain cylinder does not hold load on air loss; the piston drifts and the 29 mm cushion only decelerates near the end. For vertical loads, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAU Cylinders
Request a Quote for Airtac SAUJ100 Adjustable Cylinder SAUJ100X800-50
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.